About the H3C S7500E Configuration Guides

01 Fundamentals Configuration Guide

Describes how to use the command line interface of the switch, log in to and set up the switch. This guide includes:

·       CLI configuration

·       Login methods

·       CLI login

·       NMS login

·       User login control

·       FTP configuration

·       TFTP configuration

·       File management

·       Configuration file management

·       Software upgrade configuration

·       ISSU overview

·       ISSU configuration

·       ISSU configuration example

·       Device management

02 IRF Configuration Guide

Describes the H3C proprietary Intelligent Resilient Framework (IRF) technology, which provides data center class availability and scalability. IRF creates a fabric from multiple switches. The switches that form the IRF fabric appear as one unit in the network. IRF improves management efficiency and streamlines network topologies. It is suitable for highly reliable enterprise networks and data centers.

03 Layer 2 – LAN Switching Configuration Guide

Covers Layer 2 technologies and features used on a LAN switched network, such as VLAN technology, port isolation, Spanning Tree. You can use these features to divide broadcast domains, remove Layer 2 loops, isolate users within a VLAN, re-mark VLAN tags, implement VLAN VPNs over the Internet, remote manage the ONU device, and so on. This guide includes:

·       Ethernet interface configuration

·       Loopback and null interface configuration

·       MAC address table configuration

·       MAC Information configuration"

·       Ethernet link aggregation configuration

·       Port isolation configuration

·       Spanning tree configuration

·       BPDU tunneling configuration

·       VLAN configuration

·       Super VLAN configuration

·       Isolate-user-VLAN configuration

·       Voice VLAN configuration

·       GVRP configuration

·       QinQ configuration

·       VLAN mapping configuration

·       LLDP configuration

·       Service loopback group configuration

·       EPON configuration

·       OLT configuration

·       ONU remote management configuration

·       UNI port configuration

·       Alarm configuration

·       Supported switch feature and restrictions

04 Layer 3 – IP Services Configuration Guide

Describes how to configure IP addressing, DHCP, IP performance optimization, ARP, DNS, IPv6 basics, DHCPv6,and Tunneling. This guide includes:

·       ARP configuration

·       Gratuitous ARP configuration

·       Proxy ARP configuration

·       IP addressing configuration

·       DHCP overview

·       DHCP server configuration

·       DHCP relay agent configuration

·       DHCP client configuration

·       DHCP snooping configuration

·       IPv4 DNS configuration

·       IP performance optimization configuration

·       UDP helper configuration

·       IPv6 basics configuration

·       DHCPv6 overview

·       DHCPv6 relay agent configuration

·       DHCPv6 client configuration

·       IPv6 DNS configuration

·       Tunneling configuration

·       GRE configuration

05 Layer 3 – IP Routing Configuration Guide

Covers the routing technologies for IPv4 and IPv6 networks of different sizes. This guide includes:

·       IP routing basics configuration

·       Static routing configuration

·       RIP configuration

·       OSPF configuration

·       IS-IS configuration

·       BGP configuration

·       IPv6 static routing configuration

·       RIPng configuration

·       OSPFv3 configuration

·       IPv6 IS-IS configuration

·       IPv6 BGP configuration

·       Routing policy configuration

·       Policy-based routing configuration

06 IP Multicast Configuration Guide

Describes Layer 2 and Layer 3 multicast fundamentals and configuration. This guide includes:

·       Mulitcast overview

·       IGMP snooping configuration

·       PIM snooping configuration

·       Multicast VLAN configuration

·       Multicast routing and forwarding configuration

·       IGMP configuration

·       PIM configuration

·       MSDP configuration

·       MBGP configuration

·       MLD snooping configuration

·       IPv6 PIM snooping configuration

·       IPv6 multicast VLAN configuration

·       IPv6 multicast routing and forwarding configuration

·       MLD configuration

·       IPv6 PIM configuration

·       IPv6 MBGP configuration

07 MPLS Configuration Guide

Describes fundamentals and configuration of MPLS and its extended functions, including MCE, MPLS basics, MPLS TE tunnels, VPLS, and L2VPN and L3VPN implemented by using MPLS labels. This guide includes:

·       MCE configuration

·       IPv6 MCE configuration

·       MPLS basics configuration

·       MPLS TE configuration

·       VPLS configuration

·       MPLS L2VPN configuration

·       MPLS L3VPN configuration

·       IPv6 MPLS L3VPN configuration

08 ACL and QoS Configuration Guide

Describes how to classify traffic with ACLs, and allocate network resources and manage congestions with QoS technologies to improve network performance and network use efficiency. This guide includes:

·       ACL configuration

·       QoS overview

·       QoS configuration approaches

·       Priority mapping configuration

·       Traffic policing, traffic shaping, and line rate configuration

·       Congestion management configuration

·       Congestion avoidance configuration

·       Traffic filtering configuration

·       Priority marking configuration

·       Traffic redirecting configuration

·       Aggregation CAR configuration

·       Class-based accounting configuration

·       QPPB configuration

·       QoS in an EPON system

·       Appendix

09 Security Configuration Guide

Covers security features. The major security features available on the switch include identity authentication (AAA), access security (802.1X, MAC authentication, portal, and port security), secure management (SSH), and attack protection (IP source guard, ARP attack protection, and URPF). This guide includes:

·       AAA configuration

·       802.1X fundamentals

·       802.1X configuration

·       EAD fast deployment configuration

·       MAC authentication configuration

·       Portal configuration

·       Port security configuration

·       User profile configuration

·       Public key configuration

·       SSH2.0 configuration

·       SFTP configuration

·       TCP attack protection configuration

·       IP source guard configuration

·       ARP attack protection configuration

·       ND attack defense configuration

·       URPF configuration

10 High Availability Configuration Guide

Describes high availability technologies and features available on the switch for failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery. This guide includes:

·       High availability overview

·       Active and standby switchover configuration

·       Ethernet OAM configuration

·       Extended OAM configuration

·       CFD configuration

·       DLDP configuration

·       RRPP configuration

·       Smart Link configuration

·       Monitor Link configuration

·       VRRP configuration

·       BFD configuration

·       Track configuration

11 Network Management and Monitoring Configuration Guide

Describes features that help you manage and monitor your network, for example, manage system events, sample packets, assess network performance, synchronize the clock for all devices with the clock in the network, supply power for attached devices by using PoE, and test network connectivity. This guide includes:

·       System maintenance and debugging

·       NTP configuration

·       Information center configuration

·       SNMP configuration

·       MIB style configuration

·       RMON configuration

·       Port mirroring configuration

·       Traffic mirroring configuration

·       NQA configuration

·       sFlow configuration

·       NetStream configuration

·       IPv6 NetStream configuration

·       Sampler configuration

·       IPC configuration

·       PoE configuration

12 OAA Configuration Guide

Describes how to log in to the H3C open application platform (OAP) card connected to your switch and reset the operating system of the OAP card. H3C OAP cards use the open service architecture design, and enable you to provide custom services. This configuration guide includes:

·       OAP card configuration

·       ACFP configuration

·       ACSEI configuration